Wireless

Qualcomm: LTE IoT is starting to connect the massive IoT today, thanks to eMTC and NB-IoT

By Hao Xu, Principal Engineer, Corporate R&D, Qualcomm Technologies Inc.

We are at the dawn of 5G, a unified network envisioned to connect virtually everything around us. And to get there sooner, we are accelerating 5G NR (New Radio) — the global 5G standard — to usher in next-generation mobile broadband experiences for smartphones starting in 2019.

The first 5G NR release delivers eMBB (enhanced mobile broadband) and URLLC (ultra-reliable, low-latency communication), which can also address high-performance IoT use cases. However, it will not target the low-complexity IoT (also referred to as massive machine-type communication or mMTC).

So how will we realize the 5G vision of connecting the massive IoT? To be clear, the term “massive IoT” refers to the 10’s of billions of devices, objects, and machines that require ubiquitous connectivity even in the most remote locations, like sensors buried deep underground. To reach the massive scale (3GPP defines such as at least 1M devices per km2), mobile networks must more efficiently support the simplest devices that communicate infrequently, and are ultra-energy efficient so they can deliver extremely long, 10+ year battery life. Sound challenging? You bet! But we don’t have to wait for 5G to start connecting the massive IoT. Here’s why…

3GPP has already introduced a suite of two complementary narrowband LTE IoT technologies in Release 13: eMTC (enhanced machine-type communication) and NB-IoT (narrowband Internet of Things). Both are optimized for lower complexity/power, deeper coverage, and higher device density, while seamlessly coexisting with other LTE services such as regular mobile broadband.

Together, they expand the LTE technology portfolio to support an even wider range of low-power IoT use cases.

Figure 1: Complementary eMTC & NB-IoT address a wide range of IoT use cases

Do we really need both eMTC and NB-IoT to connect the massive IoT? The answer is yes, since complementary eMTC and NB-IoT are designed for different types of IoT use cases.

eMTC can deliver up to 1 Mbps of throughput utilizing just 1.4 MHz of bandwidth, and supports essential capabilities such as VoLTE and full mobility for a broad range of IoT use cases, including asset trackers and wearables. NB-IoT, on the other hand, scales down to extreme simplicity for low-throughput, delay-tolerant applications, such as meters and sensors. It enables data rate of just 10’s of kbps with 200 kHz of bandwidth, and can provide even deeper coverage. Furthermore, NB-IoT can be deployed within an existing LTE band, in guard-band between two regular LTE carriers, or in standalone mode, which provides an easy migration path for the re-farmed GSM (2G/GPRS) spectrum.

Beyond 3GPP Release 13, there is a rich roadmap of LTE IoT technology inventions that will deliver many further enhancements to meet tomorrow’s massive IoT connectivity needs. For example, Release 14 will bring new capabilities such as single-cell multicast to both eMTC and NB-IoT, enabling easy over-the-air firmware upgrades as well as enhanced device positioning for asset location tracking. In addition, there are two ongoing Release 15 work items that further enhance eMTC and NB-IoT, including new features such as wake-up receiver and TDD support for NB-IoT.

Figure 2: LTE IoT evolution in 3GPP Release 13 and beyond

It should be clear that LTE IoT is starting to connect the massive IoT today and both eMTC and NB-IoT will certainly continue to evolve for years to come — leveraging the scale, longevity and global coverage of LTE networks (also to seamlessly enable migration from 2G). Eventually, there will be a 5G NR-based massive IoT solution. Some future advanced design elements will include NOMA (non-orthogonal multiple access), enabling grant-free transmissions leveraging RSMA (resources speared multiple access) — in which the device sends data whenever needed without asking for permission — and mesh networking that expands on LTE’s device-to-device capabilities.

Another exciting dimension is the expansion into unlicensed spectrum. The MulteFire Alliance is adapting LTE IoT to operate in the unlicensed spectrum to expand beyond mobile broadband and high-performance IoT supported by MulteFire 1.0. This will in turn bring new opportunities for private LTE networks and enable LPWA (low-power wide-area) use cases, leveraging narrowband LTE IoT technology.

Today, we are delivering commercial multimode solutions that support eMTC’s device category Cat-M1, NB-IoT’s device category Cat-NB1, and E-GPRS. The Qualcomm MDM9206 is a flexible, single-SKU solution that enables global deployments with a single hardware, software, and RF design. And just a few weeks ago, we announced something very exciting — a joint field trial with Mobike and China Mobile — that will take advantage of our LTE IoT multi-mode solution. And mobile operators around the globe are also starting to launch commercial LTE IoT networks supporting both Cat-M1 and Cat-NB1 devices. At the time of writing this blog post, we see more than 20 mobile operators having publicly announced their commitment to deploy LTE IoT, with even more trialing eMTC and/or NB-IoT technologies in preparation for commercialization. All in all, the future of LTE IoT is bright, and we are excited to continue leading the LTE IoT evolution toward 5G.

Watch this webinar to find out where we are today with LTE IoT and to get a better understanding of all the new LTE IoT inventions coming in 3GPP Releases 14 and 15, which will take us one step closer to 5G.

Get the latest information and downloads, check out our LTE IoT evolution webpage, follow us on Twitter @qualcomm_tech, and sign up for our wireless newsletter.

The editorial staff had no role in this post's creation.